ADSL2+ MODEM/ROUTER

Model No.: PT-8505G

PTI-8505G is an IEEE 802.11b/g Wireless ADSL2/2+ Router which combines an “Always-On” high speed Asymmetric Digital Subscriber Line (ADSL) connection to the Telephone Line, and four 10/100BASE-T Ethernet port connection for host PC or other Ethernet devices, in order to enable the widest array of host connectivity. PTI-8505G is fully compliant with ADSL, ADSL2, ADSL2+, RE-ADSL2 and IEEE 802.11b/g specification. PTI-8505G is especially designed for enterprise, telecommuters, home or SOHO users with wireless speed up to 54Mbps (Optional 11g+) and ADSL downstream/upstream data rates up to 24Mbps and 2.4Mbps

Features

1. G.992.5 and ANSI T1.413 Issue 2 standards Compliant with ITU-T G.992.1, G.992.2, G.992.3, G.992.4,
2. Fully compliant with Annex A/B/B(U-R2) ADSL specifications
3. Support Annex L and Annex M specification
4. All Digital Loop ADSL supported
5. Downstream and Upstream data rates up to 24Mbps and 2.4Mbps respectively
6. IEEE 802.11g WLAN supports up to 54Mbps transmission rate
7. Support IEEE 802.11g+ features (Optional)
8. Support WEP, WPA, WPA2 and 802.1X based Encryption.
9. Integrate 4 ports Automatic MDI/MDI-X configuration transceiver
10. Support IP QoS features
11. RFC 1483 Bridge/Routing over ATM over ADSL
12. PPPoE, PPPoA and IPoA Routing ATM over ADSL
13. ATM Layer with Traffic Shaping QoS support (UBR, CBR, VBR)
14. Support UPnP specification
15. Hardware Reset button for fast default setting recovery
16. HTTP Web-based Management/Configuration
17. LED indicator indicates connection status
18. Support Dying Gasp functionality
19. Support VLAN functionality.

Specification

Hardware Interface

1. One RJ-11 Jack for ADSL Line connection
2. Four RJ-45 Jack for LAN connection
3. One USB Jack for host computer connection (Optional)
4. One Reset Button for factory default setting recovery
5. One SMA detachable 2.4GHz Antenna
6. LED Indicators indicates connection status
7. One Power Jack for DC12V/1A power adaptor

Temperature

1. Operating : +0~+50 degree centigrade
2. Non-operating : -20~+70 degree centigrade
3. Operating : 20%~80% RH
4. Non-operating : 20%~80% RH

ADSL Protocol Support

1. Full Rate ANTI T1.413 Issue 2 ITU-T G.992 and G.992.2 standard compliant
2. ITU-T G.992.3, G.992.5 and READSL2 standard compliant

IEEE 802.11g Wireless

1. IEEE 802.11b/g standards compliant
2. Support data rates up to 54Mbps (Auto-Rate Capable)
3. Support IEEE 802.11g+ features (Optional)
4. Support OFDM (64QAM, 16QAM, QPSK, BPSK) and DSSS (DBPSK, DQPSK, CCK) modulation
5. Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity (Wi-Fi) Standard
6. Support WEP, WPA, WPA2 and 802.1X based data securiry.
7. Support WDS (Wireless Distribution System).
8. Support 2.412GHZ ~ 2.484GHz frequency ranges

ATM Protocol Support      

1. Support ATM ALLo, ALL2 & ALL5
2. Support up to 8 PVCs
3. Support ATM UBR, CBR, VBR Traffic Shaping QoS
4. Support OAM F4/F5 Loop Back

Bridge Mode

1. Support Transparent Bridging (IEEE 802.1D)
2. Support RFC 2684/1483 Bridged

Router Mode

1. RFC 2684/1483 Routed
2. RFC 2225/1577 (IPoA), RFC 2364 (PPPoA), RFC 2516 (PPPoA)
3. Support PAP, CHAP & MS-CHAP PPP Authentication
4. IP Routing – RIP v1/v2 and static routing
5. DHCP Server, relay and client
6. NAT/NAPT (PAT) with extensive ALG support
7. DNS relay/server
8. Support DMZ functionality
9. Support VPN pass-through
10. IP QoS Support

Ethernet Interface

1. 4 Port 10/100Mbps Switch Interface compliant with IEEE 802.3x standards
2. Automatic MDI/MDIX crossover for 10/100 Base-T port
3. Auto-negotiation and speed-auto-sensing support
4. Support up to 4096 MAC learning address

Management

1. Web-based configuration/management
2. Remote/Local management/configuration
3. Telnet, TFTP and FTP Management/Configuration
4. Firmware upgrade and Reset to default via Web management
5. Support SNMP MIB-II
6. Support Password Authentication